PRP seats come with four vertical tabs, one in each corner on the bottom of the seat. On our standard width Premier Seats and Competition Seats the tabs are 14" from side to side and 18" from front to back. We offer the following products to help you mount your new PRP seats
Use these slider kits to replace your stock plastic pans. The sliders kits are easy to install and allow for 7” of seat movement. They work with all aftermarket seats and stock seats.
|
Use these slider kits to replace your stock plastic pans. The sliders kits are easy to install and allow for 7” of seat movement. They work with all aftermarket seats and stock seats.
Instructions
|
Use these slider kits to replace your stock plastic pans. The sliders kits are easy to install and allow for 7” of seat movement. They work with all aftermarket seats and stock seats.
|
Designed to mount to a flat surface and raise your seat 6 inches off the floorboards. Originally intended for use in a VW Bugs or Manx style buggies. They can be used wherever you have a flat mounting surface. The sliders provide 7" of movement.
|
Normally used on the passenger side of a vehicle to allow access to the back seat. This will mount to a flat surface and lifts the seat mounts 6 inches off the floorboards.
|
The same design as our Slider Mounts however they are only 2.5" tall.
We also make these 2" narrower for the PRP Roadster seats.
|
These angle mounts are used for universal mounting. They can be used to adapt our seats to several other stock vehicle slider tracks.
|
Rhino Rear Bench Seat Mount. Fits a 36" or 42" Bench
|
TERYX Rear Bench Seat Mount. Fits a 36" or 42" Bench
|
Prowler Bench Seat Mount - fits a 42” Bench Seat
|