Rhino High Back

- 31" Tall X 22" Wide X 23" Deep
- Mounting Description: Bolts to stock rhino pan using stock hardware
- Slotted for 4 point harness with 1 slot in headrest

Rhino EZN

- The Low Side is 33" tall and 22"wide, we lowered the sides of the seat to make it easy to slide in and out of.
- Mounting Description: Bolts to stock rhino pan using stock hardware

PRP also bent the headrest forward to provide more head support and allow a few more inches of clearance

24" Tall X 23" Deep (view seat dimension guide) All Side X Side benches have 3" shorter cushion Mounting Area: 15" Front to Back

36"($409)
42"($429)
Hoop Headrest $35 each (2 max)
Built in Adjustable Headrest $70 each (2 max)

Slotted for 2 or 3 people.

2 person
3 person

- 24" Tall X 22" Wide X 23" Deep
- Mounting Description: Bolts to stock rhino pan using stock hardware
- Slotted for 4 point harness

- 24" Tall X 22" Wide X 23" Deep
- Mounting Description: Bolts to stock rhino pan using stock hardware
- Slotted for 4 point harness

TERYX High Back

- 31" Tall X 22" Wide X 23" Deep
- Mounting Description: Bolts to stock teryx pan using stock hardware
- Slotted for 4 point harness with 1 slot in headrest

TERYX EZN

- The Low Side is 33" tall and 22"wide, we lowered the sides of the seat to make it easy to slide in and out of.
- Mounting Description: Bolts to stock teryx pan using stock hardware

PRP also bent the headrest forward to provide more head support and allow a few more inches of clearance

24" Tall X 23" Deep (view seat dimension guide) All Side X Side benches have 3" shorter cushion Mounting Area: 15" Front to Back

36"($409)
42"($429)
Hoop Headrest $35 each (2 max)
Built in Adjustable Headrest $70 each (2 max)

Slotted for 2 or 3 people.

2 person
3 person

- 24" Tall X 22" Wide X 23" Deep
- Mounting Description: Bolts to stock teryx pan using stock hardware
- Slotted for 4 point harness

- 24" Tall X 22" Wide X 23" Deep
- Mounting Description: Bolts to stock teryx pan using stock hardware
- Slotted for 4 point harness

Artic Cat Prowler seat

- 31" Tall X 19" Wide X 26" Deep
- Mounting Description: Bolts to stock rhino pan using stock hardware
- Slotted for 5 point harness with 1 slot in headrest
- Available as a high back or low back
- Low back is available with adjustable head rest

36’
42’
48’

53” 6” Shorter Cushion

Mounting Hardware - add $59

53” 3” Shorter Cushion

Slotted for 3 people

Mounting Hardware - add $59

- Mounting Description: Simply attach stock latch to the rear of the seat, and install the same as the stock seat

- Slotted for 4-point twin harness with two neck slots (unless ordered differently)

- Benefits:

• Added comfort and safety;
• Totally customizable; easiest install in the industry (less than ten minutes per seat);
• open-bottom design gives full suspension feel unlike other RZR seats that use the stock plastic mount;
• Maximized space lower than other RZR seats, because it has a built-in mounting bracket instead of using the typical plastic pan;
• Standard Removable seat cushion adding comfort and easy access to rear slot to release latch;
• allows more room than other RZR seats, maximizing recline and minimizing seating heigth;