Our current lead time for custom seats is 4 weeks. If you have any questions, feel free to reach out to us at [email protected]

or call us directly at (951) 894-5104.

VIEW OUR FAMILY OF BRANDS
Aluminess Company LogoBaja Designs Company LogoBestop Company LogoBullRing Company LogoMGP Company LogoSoftopper Company LogoSpeedStrap Company LogosPOD Company Logo
Status Company LogoTuffy Company Logo

sfi certified custom window nets guide

Whether you’re racing or just trying to add additional safety to your off-road vehicle, PRP Seats offers custom made window nets to fit your needs. All we need from you is a FULL SIZE template made of cardboard or poster board with the attachment types and locations noted. Nets are produced and shipped 2–3 weeks from when we receive your template.

STEP BY STEP INSTRUCTIONS

First

The first step is getting your hands on a piece of card board or poster board which will span the entire window opening. Something with a little rigidity is preferred. Please do not to use scrap, printed material as it makes reading the attachment notes more difficult.

Second

Attach the template material to the outside of the window. Any type of masking tape works fine. From the inside of the vehicle, draw the edges of the net EXACTLY how you want the Window Net to be shaped. Do NOT just trace the window opening. The extra lines confuse us. CUT OUT the final window net template.

Our cutter here just lays the template out on the material and cuts it to the exact size of the template, so your submitted template needs to be the EXACT SIZE AND SHAPE of your desired window net.

Third

Note the location (and angles if necessary) of all desired attachments (listed below). Unless noted, loops will be attached at a 90-degree angle to the edge of the net.

Fourth

Write your contact and shipping info ON the template. This ensures we do not misplace your info during production.

Fifth

Package and ship the template to:

PRP Seats, 43352 Business Park Dr. Temecula, CA 92590

Please fold the template as few times as possible or roll and ship in a tube.

SFI CERTIFICATION REQUIREMENTS

To be in compliance with SFI 27.1 Certification, window nets are required to be constructed either entirely from 1″ Webbing Material, or from Mesh Material with a strip of 1″ Webbing at 8 inch intervals across the length of the net. The net must be secured to the vehicle on the top and bottom by either a Spring Rod or Latch System. This allows for a quick disconnect of the net by the occupants, regardless of the position of the vehicle. For small triangle style nets grommets are recommended.

Want to know more? Or wondering what the exact requirements are for you race sanction?

mesh window nets

Per net. Does not include attachments. Measurement is the total perimeter of the net
$ $109 -$169
99
  • 0-60in = $109.99 ea
  • 61-80in = $114.99
  • 81-140in = $146.99
  • 140in+ = $169.99
Click Here
Popular

micro mesh window nets

Per net. Does not include attachments. Measurement is the total perimeter of the net
$ $119 -$179
99
  • 0-60in = $119.99 ea
  • 61-80in = $124.99
  • 81-140in = $152.99
  • 140in+ = $179.99
Click Here
Popular

webbing window nets

Per net. Does not include attachments. Measurement is the total perimeter of the net
$ $124-208
99
  • 0-60in = $124.99
  • 61-80in = $184.99
  • 81-140in = $197.99
  • 140in+ = $208.99
Click Here
Popular

NET MATERIALS

                         1″ MICRO MESH                                                                     MESH                                                                                1″ WEBBING                                                                          

1″ WEBBING: One inch webbing for races requiring SFI Certified Nets

Mesh: For all purpose riding. Built with one inch support webbing strips every 12″ for SFI Compliance

Attachments

                    spring rod                                                        latch                                                 clips                                                          loops                                                    

spring rod: spring rod kits include the lever and tabs to weld to the cage. SFI approved

latch: a latch is used in combination with a steel rod and link mechanism. prp does not offer hardware for this attachment. sfi approved when using top and bottom rods

clips: clips with loops to wrap around the roll bar, not typically used for legal racing and not sfi approved.

loops: hook and lopp attachment wraps around a roll bar. not typical legal for racing. not sfi approved

                    grab handle                                                                           snaps                                                                               grommets                                                                                                   

spring rod: spring rod kits include the lever and tabs to weld to the cage. SFI approved

latch: a latch is used in combination with a steel rod and link mechanism. prp does not offer hardware for this attachment. sfi approved when using top and bottom rods

clips: clips with loops to wrap around the roll bar, not typically used for legal racing and not sfi approved.

loops: hook and lopp attachment wraps around a roll bar. not typical legal for racing. not sfi approved

metal frame window nets

If you build your own metal frame, we can cover it!. You will need to mail in your metal frames, and we will wrap and sew the net around it. Make sure to also send in a template/instructions for what you want on the net, and if it requires SFI.

*Cannot use tube over 3/4″ diameter