Our current lead time for custom seats is 4 weeks. If you have any questions, feel free to reach out to us at [email protected]

or call us directly at (951) 894-5104.

VIEW OUR FAMILY OF BRANDS
Aluminess Company LogoBaja Designs Company LogoBestop Company LogoBullRing Company LogoMGP Company LogoSoftopper Company LogoSpeedStrap Company LogosPOD Company Logo
Status Company LogoTuffy Company Logo

Flush Fit Retractable Tie Down Anchors

SKU: 4025
Features
No Bull Strength & Warranty: 1000 lbs Capacity, Bullring Lifetime Warranty
Factory Look: Matches the exact grain and color of Ford railcaps
Flush Fit: Sits flush in the railcap.
Full Retractable: Snaps up & Snaps Down
Precise Fitment: ’15+ Ford F150 / ’17+ Ford F250 & F350 Super Duty / ’17+ Ford Raptor Trucks
Precise Fitment: ’15+ Ford F150 / ’17+ Ford F250 & F350 Super Duty with offset stake pockets
Factory Look: Matches the exact grain and color of Toyota railcaps
Precise Fitment: 2014 to 2019 Toyota Tundra Regular Cab and Double Cab Trucks
Precise Fitment: ’98 to 2014 Ford F150 with 6ft or 8ft bed / ’98 to 2016 Ford F250 & F350 Super Duty Trucks (Rear Stake Pockets)
Precise Fitment: ’98 to 2014 Ford F150 with 6ft or 8ft bed / ’98 to 2016 Ford F250 & F350 Super Duty Trucks (Front or Middle Stake Pockets)
Vehicle Selection
Finish
Packaging

DESCRIPTION

Ford Flush Fit Retractable Tie Down Anchors - ’15+ Ford F-150 | ’17+ Ford Super Duty | ’17+ Ford Raptor

Bull Ring’s are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bullrings retractable anchor points easily install into the stake pockets on top of your bed rails. Simply snap the stainless steel ring up when you want to use it to secure a load, then snap it down flush when you don’t. Each is made from stainless steel for a 1000 lbs capacity, matches the exact grain and color of Ford railcaps, and comes with our "no bull" Lifetime Warranty. Sold as a pair.

Our Flush model sits in line with the railcaps for a flush, clean look. and makes them compatible with Tonneau covers. Installation is quick and easy, and requires nothing more than a Phillips head screwdriver. Typical install time - Under a minute.

Can be installed in the 6 stake pockets locations of your Ford truck to get the most out of your tie-down anchors. With kits of 1, 2, or 3 pairs available to fit those slots.

Front (6.75′, 8′ Bed) - 4025
Middle (8′ Bed) - 4025
Rear (5.5', 6.75′, 8′ Bed) - 4025
Disclaimer and Warning

Disclaimer

Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care. Buyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines. Buyer is solely responsible for (and will indemnify and hold PRP Seats harmless for) any claims, losses, damages, fines, fees, costs, or other amounts arising out of Buyer’s non-compliance with these provisions.

PRP Seats California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.