VIEW OUR FAMILY OF BRANDS
Aluminess Company LogoBaja Designs Company LogoBestop Company LogoBullRing Company LogoMGP Company LogoSoftopper Company LogoSpeedStrap Company LogosPOD Company Logo
Status Company LogoTuffy Company Logo

Gunmetal Flush Fit Retractable Tie-Down Anchors - 2014+ Chevy Silverado/GMC Sierra without Dually Bed

SKU: 4005
Features
Precise Fitment: 2014+ Chevy Silverado/GMC Sierra (Front Stake Pockets only)
Full Retractable: Snaps up & Snaps Down
Flush Fit: Sits flush in the railcap.
Innovative Design: Stainless Ring, Stainless Chassis, Nylon Lower Body with sound dampening
No Bull Strength & Warranty: 1000 lbs Capacity, Bullring Lifetime Warranty
Vehicle Selection
Finish
Packaging

DESCRIPTION

Gunmetal Flush Fit Retractable Tie-Down Anchors (Front Only) | 2014 + Chevy Silverado and GMC Sierra | #4005
Bullring’s are the premium tie-down anchor point for your truck. While the stock anchors points are inside the bed where it’s hard to reach, Bullrings retractable anchor points easily install into the stake pockets on top of your bed rails. Simply pop the stainless steel ring up when you want to use it to secure a load, then hit it down flush when you don’t. Each is made from stainless steel for a 1000 lbs capacity, and comes with our “no bull” Lifetime Warranty. Sold as a pair. Bull Ring’s stainless steel tie down anchors are an essential truck bed accessory.
Our flush fit model sits level with the rail cap, and has a black nickel "gunmetal" finish. Compatible with most Tonneau roll up covers. Only fits on the front Stake Pockets (by the window). Requires the plastic rail cap to be trimmed/cut to install. We highly recommend using our Hidden Pocket Router Bit to install.
Installation
2014+ Chevy Silverado / GMC Sierra – REQUIRE RAIL CAP TRIM TO INSTALL (purchase Hidden Pocket Router Bit for easy install)
2014+ model Chevy/GMC trucks have stake pockets that are hidden or obstructed by the plastic rail caps, and require a trim of the plastic for the anchor points to be properly installed. (See video below for detailed instructions). We highly recommend using our custom router bits – they make the installation quick and easy, and create for a perfect cut every time.
Front Stake Pockets – The scribe lines in the front of the rail caps are incorrect, and are actually larger than the stake pocket hidden underneath. For this installation we’ve developed a custom router bit that enables you to quickly and easily trim out the top plastic rail to perfectly match the steel pocket underneath. The design of our router bit incorporates 4 roller bearings that run along the steel pocket as a guide. It only cuts the plastic, without scratching or cutting the painted metal surface of the rail. Using this router bit gives you a perfect cut every time, and allows you to then place our Retractable Anchor into the now exposed stake pocket. *Does not fit on Dually Beds.
Disclaimer and Warning

Disclaimer

Buyer is responsible for ensuring that it uses the products (and its vehicle) in accordance with all applicable laws, regulations, guidelines, and standards of care. Buyer acknowledges that some products may only be used when off-roading, and Buyer will comply with all vehicle and road safety guidelines. Buyer is solely responsible for (and will indemnify and hold PRP Seats harmless for) any claims, losses, damages, fines, fees, costs, or other amounts arising out of Buyer’s non-compliance with these provisions.

PRP Seats California Proposition 65

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.